APE Model 15-60 Hydraulic Impact Hammer
|
|
| SPECIFICATIONS |
DATA |
| Maximum Rated Energy |
150,000 ft-lbs |
| Maximum Stroke |
60 in |
| Minimum Stroke |
6 in |
| Minimum Energy |
10,000 ft-lbs |
| Blows per minute at minimum stroke |
60 |
| Blows per minute at maximum stroke |
28 |
| Total suspended weight without drive cap |
44,000 lbs |
| Drive cap |
Depends on pile type |
| Cusion Material Manufacturer |
Penn State |
| Cusion Material type |
Conbest and Aluminum |
| Cusion Material Diameter |
25 in |
| Cusion Material Elastic-Modulus |
285 kips per square inch |
| Cusion Material Thickness |
5.5 inches |
| Operating height |
17 ft |
| Overall width |
37 in |
| Width for leads |
32 in |
|
|
APE Model 625 Power Unit
| SPECIFICATIONS |
DATA |
| Power Unit Engine |
CAT 3408E DITA |
| Maximum Power |
625 hp (466 kW) |
| Operating Speed |
800 to 2100 rpm |
| Maximum Drive Pressure |
4,500 psi (310 bar) |
| Maximum Hyd. Flow-Forward |
0 to 190 gpm (779 lpm) |
| Maximum Hyd. Flow-Reverse |
0 to 190 gpm (779 lpm) |
| Clamp Pressure |
4,500 psi (310 bar) |
| Clamp Pump Flow @ 2200 rpm |
10 gpm (38 lpm) |
| Weight |
18,000 lbs (8165 kg) |
| Length |
156 in (396.24 cm) |
| Width |
70 in (179 cm) |
| Height |
101 in (257 cm) |
| Fuel Capacity |
145.4 gal (550 L) |
| Hydraulic Tank (main) |
533.4 gal (2019 L) |
| Hydraulic Tank (reserve) |
76.2 gal (288 L) |
|
|
|